From November 2024, 8 Lighting Standards will come into effect
- Share
- From
- www.lightingchina.com.cn
- Issue Time
- Nov 27,2024
Summary
A total of eight lighting standards are set to take effect in November, including two national standards, one local standard, and five group standards.
According to incomplete statistics, a total of eight lighting standards are set to take effect in November, including two national standards, one local standard, and five group standards. The content covers key areas such as mature lighting environments, road lighting, healthy lighting, signal lights, reading and task lights, and solar street lights.
The specific details are as follows
National Standard
Standard Name:
Mechanical Safety - Integral Lighting Systems for Machines
Publication Date:
April 25, 2024
Implementation Date:
November 1, 2024
Scope:
This document specifies the technical requirements, lighting equipment and installation, inspection methods, and usage information for integral lighting systems for machines. It applies to the design, installation, and conformity assessment of integral lighting systems both inside and outside machines.
This document does not apply to integral lighting systems in machines operating in the following environments:
- Extreme environmental conditions (e.g., inside freezing or high-temperature equipment).
- Special environmental conditions (e.g., explosive or corrosive environments).
- Conditions with very low visibility caused by smoke, mist, or dust.
Standard Number:
GB/T 43992-2024
Standard Name:
Specification for Quality Evaluation of Urban Light Environment Construction Services
Publication Date:
April 25, 2024
Implementation Date:
November 1, 2024
Scope:
This document specifies the general requirements, service process requirements, service result requirements, and evaluation methods for urban light environment construction services.
It is applicable to the quality evaluation of construction services for new, renovated, and expanded projects in the urban light environment field, provided by related units for construction, planning and design, product procurement and supply, as well as construction and testing acceptance. This evaluation is conducted by urban light environment management units.
Note:
The evaluation can be organized by urban light environment management units or third-party evaluation organizations.
Local Standard
Standard Number:
DB6101/T 3208-2024
Standard Name:
Specification for Operation, Maintenance, and Management of Urban Road Lighting Facilities
Publication Date:
October 14, 2024
Implementation Date:
November 14, 2024
Scope:
This document specifies the requirements for the operation and maintenance, management, and evaluation of urban road lighting facilities.
It is applicable to the operation and maintenance, as well as management, of urban road lighting facilities in Xi'an. For clarity, "road lighting facilities" in this document may be abbreviated as "facilities" without causing confusion.
Group Standard
Standard Number:
T/GIES 016—2023
Standard Name:
Technical Specification for Healthy Lighting in Children's Rooms
Publication Date:
November 4, 2024
Implementation Date:
November 6, 2024
Scope:
This document specifies the technical requirements for LED luminaires, lighting quality requirements, and testing methods for healthy lighting environments in children’s rooms. It is applicable to home environments where children are studying, reading at the bedside, or engaging in daily activities.
Key Technical Contents:
1. Lighting Design and Layout:
- Consider the actual layout and functional zones of the children's room.
- Determine luminaire positions and quantities to ensure light sources cover the entire room and meet the lighting needs of each zone.
2. Light Source Control System:
- Include suitable control systems, such as dimming, color temperature adjustment, and timers, to adapt to various scenarios and improve energy efficiency.
3. Uniform Light Distribution:
- Ensure even light distribution across different areas of the room through appropriate luminaire placement and beam angle control, avoiding glare and shadows for a comfortable visual environment.
4. Color Design:
- Choose appropriate lighting colors, using soft and warm tones based on the child’s needs and functional zones.
- Create a cozy and pleasant atmosphere that supports emotional stability and focus.
Standard Number:
T/EJCCCSE 068—2024
Standard Name:
IoT-Based Remote-Controlled Traffic Signal Lights
Publication Date:
October 31, 2024
Implementation Date:
November 30, 2024
Key Technical Contents:
This standard outlines the product classification, parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for IoT-based remote-controlled traffic signal lights.
Standard Number:
T/ZSLED 15—2024
Standard Name:
LED Desk Lamps for Reading and Writing Tasks
Publication Date:
October 30, 2024
Implementation Date:
November 5, 2024
Key Technical Contents:
This standard specifies the general requirements, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for LED desk lamps used for reading and writing tasks. These include desk lamps with LED as the light source, with a power supply voltage not exceeding 250V, intended for use in homes, classrooms, and similar environments. The lamps may claim functionalities such as "eye protection," "study use," or "work use" and include models with built-in charging features, USB-powered connections, and clip-on designs.
Standard Number:
T/QGCML 4792—2024
Standard Name:
Specification for Installation and Acceptance of Solar Street Lights
Publication Date:
October 17, 2024
Implementation Date:
November 1, 2024
Key Technical Contents:
This document specifies the terminology, definitions, raw materials, structure, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, and project acceptance for solar street lights. It applies to the design, installation, and inspection of solar street lights in accordance with this specification.
Standard Number:
T/GDSCEE 101.1—2024
Standard Name:
Technical Requirements for Stage Lighting Products – Part 1: Moving Head Lights
Publication Date:
October 12, 2024
Implementation Date:
November 12, 2024
Key Technical Contents:
Technical requirements for indoor stage lighting products.