8.The production process.
1.Engineer design2.Mould master carve the mould with QC check3.Case-casting components by the mould with QC check4.Fill ash5.Polish with QC check6.Tapping with QC check7.Drill hole with QC check8.Clean oil9.Welding10.Spray the plastic outdoor powder with QC check11.Led light with radiator with QC check12.Assemble with QC check13.Olding with QC check14.Clean 15.Packing with QC checkThe production process begins with engineer design, followed by mould carving with QC checks to ensure accuracy. Components are then case-cast using the mould, again verified by QC. Subsequent steps include filling ash, polishing, tapping, and drilling holes, all accompanied by QC inspections. After cleaning oil residues, welding joins parts securely. A plastic outdoor powder coating is applied (QC-checked), and LED lights with radiators are installed (also QC-verified). The product is then assembled, olded (possibly a typo for "molded"?), and cleaned before final packaging with a last QC review. This rigorous 15-step process ensures consistent quality from raw materials to finished goods.